Seiko Instruments LP-1020 Marine GPS System User Manual


 
12-6
ROUTING TABLE
Specifies the routing table of this device. It is used to connect this device
to a host of other network.
GATEWAY ADDR
Specifies the Router IP address.
<Parameter (numerical input method)>
000.000.000.000 to 255.255.255.255
Default value: 000.000.000.000 (not set)
NETWORK ADDR
Specifies the network address
<Parameter (numerical input method)>
000.000.000.000 to 255.255.255.255
Default value: 000.000.000.000
If the gateway address is not specified, it is not displayed.
When this setting value is "000.000.000.000," it means the
default routing is specified.
Notes