Filter
Top Products
5-12
AUTO SUPPLY
Allows for setting the paper feeding conditions.
This setting is performed on the second hierarchy.
<Parameter (choice input method)> : Default value
CONT MODE When plots can be produced without clipping the drawing, the
plots are continuously produced (Small rolls only).
OPTIMAL MODE An optimum roll is used for plotting to minimize wasted
media. If the optimum roll is not loaded, the printing process
is suspended and replacement of paper is demanded.
ROLL 1 MODE Prints on roll 1 paper.
ROLL 2 MODE Prints on roll 2 paper.
MANUAL FEED Prints on the paper fed by hand.
◆ The default value varies depending on the setting in the
INITIAL SETTING.
Note