Filter
Top Products
3-3
Chapter 3 Menu overview
yalpsiDDCLstamrofataD
NACSD
.tamrofNACS-Dlanigiros'ynapmocruosisihT
.atadretsaRNACS-DstroppusoslatI
LGPH
.tamrof2C/CNACS-Ds'ynapmocruostroppuS
).tamrofLG-PHsaotderreferretfaereh(
FFIT0.4noisiveRFFITotgnimrofnoctamrofatadA
SLAC.IepyTretsaRSLACotgnimrofnoctamrofatadA
Data formats
Data formats which can be used
This device supports the data formats indicated below.
■Data formats
◆ It is necessary to specify in “PDL SELECT” (⇒ page 9-3) which
data format the received data will be processed as.
◆ DSCANC/C2 format is a data format conforming to the
command system of HP company indicated below:
D-SCAN C format: conforming to HP-GL
D-SCAN C2 format: conforming to HP-GL / 2, HP RTL
◆ For details on the commands supported by this device, refer to
“COMMAND LIST” in the appendix.
◆ In this manual, the above data formats are collectly referred to
as PDL.
Data format auto-judging
This device is equipped with a function to automatically recognize and
process the format of the received data.
This function allows data of different formats to be sent to a single
channel or port and to have this data plotted.
There are 4 formats which can be judged: D-SCAN format, HP-GL
format, TIFF, and CALS format.
The data format auto-recognition function cannot be used for the USB
channel. For the USB port, connect our company’s printer driver.