Filter
Top Products
25
Models H71 & H84 Operating Procedures
Note: The Model H84 has three draw handles. Slide
the fork of the draw handle in the slot of the draw valve,
starting from right to left. Slide the pivot pin through
each draw handle as you insert them into the draw
valves.
Step 7
Install the front drip tray and the splash shield under
the door spout(s).
Figure 12
Step 8
Slide the rear drip pan into the hole in the side panel.
Figure 13
Step 9
Slide the three o-rings into the grooves of the inner air
tube.
Figure 14
Slide the two o-rings into the grooves of the outer air
tube.
Figure 15
Slide the small o-ring into the groove of the air orifice.
12077
Figure 16