A SERVICE OF

logo

Open as PDF
next previous
157
PARAMETERS
4
4.2.48 OL signal output timer (Pr. 157)
Pr. 157 "OL signal waiting time"
Use this parameter to set whether the overload alarm signal (OL signal) is output immediately or a preset
period of time after occurrence of an overload status.
<Setting>
Refer to the following table and set the parameter:
Parameter
Number
Factory Setting Setting Range Remarks
157 0 0 to 25 s, 9999 9999: No signal output
Pr. 157 Setting Description
0 Output immediately.
0.1 to 25 Output after the set time (s) has elapsed.
9999 Overload alarm signal is not output.
Related parameters
Pr. 190 to Pr. 195
"output terminal function selection"
Set time (s)
Overload status (OL output)
L output signal
Pr. 158 Refer to Pr. 54.