190
PARAMETERS
Pr. 903 "frequency setting voltage gain"
(Pr. 902, Pr. 904, Pr. 905 can also be adjusted similarly.)
<Adjustment procedure>
When using the frequency setting signal from the operation
panel (FR-DU04) to set the frequency.
(1) Power-on (monitoring mode)
(2) Choose the PU operation mode.
1) Using the key, make sure that the PU operation mode has been selected.
FR-DU04
CONTROL PANEL
Hz
MON EXT PU
A
V
REV FWD
MODE
zMonitoring mode
MODE
zFrequency setting
mode
z
Parameter setting
mode
z
Help mode
z
Operation mode
(PU operation mode)
MODE MODE
MODE
MODE
Confirm that the PU operation mode
( ) has been chosen.
In the jog operation mode ( )
or external operation mode ( ),
press the / key to display .
If cannot be displayed by pressing
the / key in the external operation mode
( ) (if Pr. 79 "operation mode
selection"
≠
"0"), refer to 2) and set "1"
(PU operation mode) in Pr. 79 "operation mode
selection".
FR-DU04
CONTROL PANEL
Hz
MON EXT PU
A
V
REV FWD
FR-DU04
CONTROL PANEL
Hz
MON EXT PU
A
V
REV FWD
FR-DU04
CONTROL PANEL
Hz
MON EXT PU
A
V
REV FWD
FR-DU04
CONTROL PANEL
Hz
MON EXT PU
A
V
REV FWD
FR-DU04
CONTROL PANEL
Hz
MON EXT PU
A
V
REV FWD
