193
PARAMETERS
4
• When not adjusting the gain voltage → go to (5) - 1)
• When adjusting any point by applying a voltage → go to (5) - 2)
• When adjusting any point without applying a voltage → go to (5) - 3)
(5) - 1) How to adjust only the gain frequency and not to adjust the voltage
(5) - 2) How to adjust any point by applying a voltage across terminals 2-5 (e.g. from the external
potentiometer) (current: across terminals 4-5) (When applying 5V)
(5) - 3) How to adjust any point without applying a voltage across terminals 2-5 (without a current flowing
across terminals 4-5) (when changing from 4V (80%) to 5V (100%))
(6) Press the key to shift to the next parameter.
(7) Re-set Pr. 79 "operation mode selection" according to the operation mode to be used.
Press for 1.5 s
SET
Flicker
zz
Press the or key once to display
the current analog voltage adjustment.
Example:
When analog voltage
adjustment value is 100%(5V)
FR-DU04
CONTROL PANEL
Hz
MON EXT PU
A
V
REV FWD
Analog voltage value (%)
across terminals 2-5
To (6)
Press for 1.5 s
Flicker
zz
Apply a 5V voltage.
(Turn the external potentiometer
connected across terminals 2-5 to maximum.)
SET
When the potentiometer is
at the maximum position,
the value is nearly 100.
FR-DU04
CONTROL PANEL
Hz
MON EXT PU
A
V
REV FWD
Analog voltage value (%)
across terminals 2-5
To (6)
Press for 1.5 s
Flicker
z
SET
zPress the or key
once to display the current
analog voltage calibration value.
zSet the gain voltage (%) with
the key.
[0(%) for 0V (0mA), 100(%) for
5V (10V, 20mA)]
/
/
FR-DU04
CONTROL PANEL
Hz
MON EXT PU
A
V
REV FWD
Analog voltage value (%)
across terminals 2-5
To (6)
SET
