194 Section 3F: Using Wireless Connections
Disconnecting From a Wi-Fi Network
To disconnect from a Wi-Fi network, do one of the following:
ⅷ To save any settings you entered, press and hold Wi-Fi to disconnect from the Wi-Fi
network. The next time you’re within range and the Wi-Fi feature is turned on, your Treo
automatically connects to this network.
ⅷ Press Start , select Settings, select the Connections tab, and then select Wi-Fi .
Highlight the network from which you want to disconnect, and then press Disconnect
(left softkey).
ⅷ To remove the network settings from memory, press Menu (right softkey) and select
Remove Settings. The next time you’re within range and the Wi-Fi feature is turned on, you
must re-create the connection to connect to this network.
Customizing Wi-Fi Settings
1. Press Start and select Settings.
2. Select the Connections tab, and then select WiFi Prefs .
3. On the Power tab, set any of the following:
Ⅲ Enable Power Save Mode: Conserve battery power
when Wi-Fi is turned on. For optimum battery
performance, leave this option enabled.
Ⅲ Connection: Set when the Wi-Fi feature is on and when
your Treo attempts to search for networks.
Ⅲ On Button Press: Leave the Wi-Fi feature off until you
press Wi-Fi to turn it on. After you turn the Wi-Fi feature on, your Treo searches
for available networks.
Ⅲ Always On: Leave the Wi-Fi feature on. Your Treo searches for available
networks whenever the screen is awake. If a network to which you previously
connected is available, your device automatically connects to that network. To
prevent your Treo from searching for networks, press and hold Wi-Fi to turn
the Wi-Fi feature off.
