202 Section 3F: Using Wireless Connections
Receiving Beamed Information
1. Turn on your screen.
2. Point the IR port on your Treo directly at the IR port on the transmitting device.
3. When the Receiving Data message appears, select Yes to receive the beam.
Synchronizing Over an Infrared Connection
1. Set up your computer to receive infrared beams. (See ActiveSync Help on your
computer for details.)
2. Point the IR port on your Treo directly at the IR port on your computer.
3. On your Treo, press Start and select Programs.
4. Select ActiveSync .
5. Press Menu (right softkey) and select Connect via IR.
6. Select Sync.
Tip
If you can’t receive beamed information, press Start and select Settings.
Select the
Connections tab, and then select Beam. Make sure the Receive
all incoming beams box is checked. If you still can’t receive information, try
a soft reset (see “Resetting Your Palm
®
Treo™ 800W Smart Device” on
page 349).
