Filter
Top Products
1. OPERATIONAL OVERVIEW
1-3
1.3 Turning the Power On/Off
1.3.1 Power on
Press the [POWER] switch on the control unit until you hear a “click.” A beep sounds, the
lamp above the switch lights and the startup display appears (for four seconds).
MODEL : CH-270 180kHz
Startup display
Note 1: Wait at least five seconds before reapplying the power.
Note 2: The first time the power is applied after installation, the language selection screen
appears. English is selected; press the [MENU] key to erase the screen and
continue.
Please set language.
([ / ]: Select, [MENU]: Enter)
XXXX ... For Japanese Customer
XXXX
English
(Japanese)
Language selection screen
Note 3: The example screens shown in this manual may not match the screens you see on
your display. The screen you see depends on your system configuration and
equipment settings.