Filter
Top Products
5. MENU OPERATION
5-9
5.4.2 SYSTEM SETTING 1 menu description
1. Display the SYSTEM menu and then press ▲ or ▼ to choose SYSTEM SETTING.
2. Press ► to open the SYSTEM SETTING menu.
3. Press ▲ to MENU.
4. Press ◄ to choose “1.”
OFF 10sec 30sec 1min 3min 6min
TARGET L/L :
OFF ON
CUSTOM KEY :
PRESET KEY
SHORT-CUT KEY
OFF NORMAL RED
ETA MARK :
EMPHASIS MODE :
m ft fa HIRO P/B
UNIT :
OFF FLOW FROM FLOW TO
SHIP'S L/L SHIP'S LOP CURSOR L/L
POSITION :
CURRENT DATA :
HEADING INDICATION :
TRUE AZ
: SELECT
: CHANGE MENU: END
MENU 1 2
NORTH MARK :
OFF ON
CSE DATA :
NAV GYRO
NAV DATA :
GPS LoranC LoranA DR DECCA OTHERS
TVG CORRECTION :
OFF 1/2 1/1
** SYSTEM SETTING 1 **
TEMP
: C F
TRACK : OFF ON
System setting 1 menu
SYSTEM SETTING 1 menu description
POSITION: Chooses how to display position data. The choices are latitude and longitude,
LOP (Decca or Loran, whichever navigator is connected) or cursor latitude and longitude.
(The connected navigator must be capable of displaying L/L or LOP.) Position data
required.
TRACK: Turns the track display on or off on the horizontal display. The track is always
shown on the video plotter display regardless of this setting.
CURRENT DATA: Turns current data (tide) on or off. FLOW FROM shows from what
direction the current is flowing; FLOW TO shows the direction the current is heading.
Requires connection a current indicator.
Current Vector
FLOW FROM FLOW TO
Current vector