Filter
Top Products
4. ECHO SOUNDER MODE
4-4
4.4 Train Direction
The sounding beam may be directed 360° in any direction. Operate the [TRAIN] control to
choose sounding beam direction. Each setting on the control is an increment of 6°. The
train indicator at the top of the screen shows training direction: 0°, fore direction; 90°,
starboard direction; 180°, aft direction, and 270°, port direction.
0 (360 ) → 6 → 12 → 18 → ... 354
Train 0 Train 90 Train 180 Train 270
Train indicator and display
4.5 Choosing Tilt Angle
The transducer can be pointed directly toward the bottom or forward of the ship. Operate
the [TILT] control to choose an appropriate tilt angle. The available tilt angle is 0° (horizontal
direction) to 90° (vertical), in increments of 1°
. Chosen tilt angle appears at the top of the
display to the right of “T”.
4.6 Choosing Picture Advance Speed
The picture advance speed determines how quickly the vertical scan lines run across the
screen, from right to left. When choosing a picture speed, keep in mind that a fast advance
speed will expand a fish school horizontally on the screen and a slow one will contract it.
1. Press the [FAST SCAN] key. The following dialog box appears. Do the next step within
four seconds; otherwise the dialog box will be erased.
ADVANCE
1/8 1/4 1/2 1/1 2/1
2. Press ◄ or ► ([FAST SCAN] key may also be used) to choose a speed. The fractions
in the dialog box correspond to the number of scan lines produced per transmission. For
example, “2/1” means two scan lines are produced per transmission.
3. Press the [MENU] key to close the dialog box. Note that the dialog box is automatically
closed if there is no control operation for about four seconds.