Filter
Top Products
17
any other time. In order to set the altitude, you will have to restart the main unit
completely.
To set the pressure & altitude units and program your altitude, use the handheld remote
control or main unit control panel:
Buttons and Controls
Most of the handheld remote control buttons are corresponding to the main unit controls.
To expose the main unit control buttons, press the OPEN button on the upper right corner
of the main unit and the controls’ cover door will open.
Main unit and handheld remote control adequate buttons
A. UP
Selects the next available mode anti-clockwise
Increases parameters
B. DOWN
Selects the next available mode clockwise
Decreases parameters
C. SET
Rotates display for current mode
If depressed and hold, enters into the programming mode or
changes parameter’s units
Confirms set parameters
D. MEMORY
Allows displaying the moon phase, UV, temperature,
humidity, rainfall and wind memory records