Filter
Top Products
30
• Make sure the unit is positioned at 8 feet (2 meters) distance from any
interference source such as a TV, computer monitor, microwave, etc.
• Within concrete wall rooms such as basements or office buildings, the received
signal may be weakened. Always place the Projection Clock near the window
for better reception.
Once the atomic time signal is received, the date and time will be set automatically, and
the [
] icon will appear.
After the clock is set manually, place the main unit by the window for the better reception.
The atomic clock receiver is programmed that it will continue to search for the atomic
time signal daily for every hour between 1:00 am and 4:30 am.
Once the time signal has been successfully received, the time and date will be updated
automatically.
To enable or disable the atomic time receiver:
• Press and hold UP - if atomic time reception is activated, a triangular tower icon
will start flashing next to the clock icon. If reception is disabled, the triangular
tower icon will disappear.
Icon Atomic Time Reception Strength
(Flashing)
Undefined data
Reception failed for 24 hours
Weak signal, but can be decoded
Strong signal
Sunrise/Sunset Mode
The main unit is able to calculate the sunrise and sunset times depending on the user
defined location. The location data contains from the longitude, latitude, time zone and
DST (Daylight Saving Time).
Select the closest to your area city code and the main unit will automatically generate all
of the correct data for specified location.
If you cannot find the closest city code or would like to enter your specific location,
select “USR” as the city code during the setup.
A search function is also available. It allows viewing the sunrise/sunset times for different