Filter
Top Products
5
4 screws for securing rain gauge to the flat
surface;
4 screws for securing anemometer to vertical
surface
Mounting hardware
2m (6ft) USB cable
PC connection cable
Installation
The Honeywell Professional Weather Station TE923W operates at 433MHz radio
frequency, so no wire installation is required between the main unit (receiver) and the
remote weather sensors (transmitters).
The remote weather sensors include a thermo-hygrometer (temperature and humidity)
sensor, UV (ultraviolet) sensor, anemometer (wind sensor) and a rain gauge (rain sensor).
All data measured by these remote sensors is transmitted to the main unit wirelessly, with
the operating range up to 328 feet (100 meters) in the open area.
Remote UV sensor, anemometer and a rain gauge must be placed outdoors to measure
weather elements.
Remote thermo-hygrometers can be placed indoors or outdoors, depending on the area
where the temperature and humidity are intended to be measured. If you intend
measuring outdoor temperature and humidity, place the remote sensor outdoors.
Note: It is critical to assemble and power up all of the remote weather sensors BEFORE
setting up the main unit.
Note: It is critical to power up and test communication between all of the weather sensors
and the main unit BEFORE permanently mounting them outside.