Filter
Top Products
24
• Press UP or DOWN button selecting the pressure in inHg, hPa/mBar or mmHg
• Press SET to confirm and move to the altitude unit selection mode
• Press UP or DOWN button selecting the altitude unit in feet or meters.
• Press SET button to confirm and move to the altitude programming mode.
• Press UP or DOWN to adjust an altitude value. Press and hold either button for
the advanced setting.
• Press SET to confirm the programming.
IMPORTANT
: After the initial setup the altitude cannot be adjusted anymore. In order to
adjust the altitude, you will have to restart the main unit completely.
Viewing the Pressure and Altitude Information
To view a pressure or altitude information, press SET button rotating between the sea
level pressure, local pressure and local altitude screens.
Sea Level Pressure Setting
• Press SET button until the sea level pressure with “SEA LEVEL” is displayed.
• Press and hold SET until the pressure digits are flashing.
• Set the sea level pressure by pressing UP or DOWN buttons. Press and hold
either button for the quick digits advance.
• Press SET to confirm selection.
Setting the Pressure and Altitude Unit
• Press SET until the local pressure with the word “LOCAL” is displayed.
• Press and hold MEMORY until the pressure unit is flashing.
• Set the local pressure units by pressing the UP or DOWN buttons to adjust the
pressure value.
• Press MEMORY to confirm your selection.
• Press SET button until the local altitude value will be displayed
• Press and hold MEMORY until the altitude unit is flashing.
• Set the altitude unit in meters or feet by pressing the UP or DOWN.
• Press MEMORY to confirm your selection.
• Press SET until the sea level pressure with the word “SEA LEVEL” is
displayed.
• Press and hold MEMORY until the pressure unit is flashing.
• Set the sea level pressure unit by pressing UP or DOWN
.
• Press MEMORY to confirm your selection.
Viewing the Sea Level Pressure History
• In all modes, press HISTORY button entering the sea level pressure display.
• When the SEA LEVEL is displayed, press HISTORY repeatedly viewing the
sea level pressure history for the past 24 hours in hour increments.
• If no buttons are pressed for 5 seconds, the unit will automatically return to the
Pressure and Weather Forecast Mode.