Honeywell TE923W Marine Radio User Manual


 
32
The corresponding sunrise and sunset times will be displayed for the selected
date.
Press MEMORY or SET to return display to the Sunrise/Sunset Mode.
Understanding of the Sunrise/Sunset Display
The sunrise time displayed in the morning will be different from the one displayed in the
afternoon/night:
From 12 am to 12 pm the current day sunrise time will be displayed.
From 12 pm to 12am the next day sunrise time with the “NEXT DAY” icon will be
displayed
At some locations, especially with high latitudes, sunrise and sunset events may not occur
within 24 hours.
Display Sunrise status Display Sunset status
FULL Sunrise for the
previous day
FULL Sunset on the
following day
or later
- - - - No sunrise for the
whole day
- - - - No sunset for
the whole day
Temperature and Humidity Mode
The weather station supports up to 5 remote thermo hygrometers, corresponding to a
separate channel of the temperature and relative humidity display. The temperature can be
displayed in Celsius (ºC) or Fahrenheit (ºF).
The main unit carries the temperature and humidity sensor and uses this indoors data to
calculate an indoors comfort level - Wet, Comfort or Dry.
A temperature alert function is available for each channel. It can be programmed to sound
if the channel temperature exceeds or falls below the pre-set upper and lower limit.
Note: The temperature alerts have a 0.5 ºC deviation to prevent them from sounding due
to small temperature fluctuations that are close to the set alert value. This means that after
the temperature reaches the alert temperature, it will have to fall below the alert
temperature plus the deviation (0.5°C) to activate the alert.
Accessing Temperature and Humidity Mode
From the main unit: Press UP or DOWN until the IN icon
on the upper right will