Filter
Top Products
56
10
SET MODE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
DD
Memory name setting
Sets memory name appearance ON (appear) and OFF (does
not appear; default).
This item appears when set mode
is accessed from memory
mode only.
DD
Memory bank link function
Sets the memory bank link function ON and OFF (default).
The link function provides continuous banks scan, that scans
all contents in the selected banks during bank scan.
This item appears when set mode
is accessed from memory
mode only.
• Bank link setting
q Rotate main band’s [DIAL] to select the memory bank link
function ON.
w Push and hold [SET•SKIP] or [ATT•PRIO] for 1 sec. to
enter bank link setting mode
.
e Push [SET•SKIP] or [ATT•PRIO] to select the desired
bank to be linked.
•A: Bank A • b : Bank B • C : Bank C • d : Bank D
• E : Bank E • F : Bank F • G : Bank G • H : Bank H
• J : Bank J • k : Bank K • L : Bank L • m: Bank M
• n : Bank N • o : Bank O • P : Bank P • q : Bank Q
• R : Bank R • t : Bank T • U : Bank U • W: Bank W
• y : Bank Y
r Rotate the main band’s [DIAL] to select “On (default)” to
linking the bank.
t Repeat steps e and r to set the link condition.
y Push any key for the main band to return to set mode
.
Bank A: ON Bank A: OFF