Filter
Top Products
12
Adding a page:
1. Press MENU, use the UP and DOWN keys to select PAGES and press
MENU, which will open the Pages menu with the following options: Add
Page, Rem Page, Autoscroll and Set Pop-up.
2. Highlight
ADD PAGE and press MENU.
3. Select Gauge, Single Digital or Dual Digital and press
MENU. You
will be taken back to the main display, where the page you selected will
be shown.
Customizing Pages
The customizing pages feature allows you to choose what data will be
displayed and where it will be displayed on select pages. You can
customize the Gauge, Single Digital and Dual Digital pages with
pressure sensor data: Pitot Speed (PTT:S), Water Pressure (WTR:P),
Engine Oil Pressure (Eng:O:P), Fuel Pressure (FUL:P), Boost Pressure
(BST:P), Transmission Oil Pressure (Trn:O:P) and Atmospheric
Pressure (ATM:P).
To customize Gauge page:
1. After the Gauge page has been added to the page screen rotation, use
the
UP and DOWN keys to display it on the screen.
2. Press
MENU, select CUSTOMIZE and press MENU.
3. Highlight
PTT:S (Pitot Speed), WTR:P (Engine Water Pressure),
ENG:O:P (Engine Oil Pressure), FUL:P (Fuel Pressure), BST:P (Boost
Pressure),
TRN:O:P (Transmission Oil Pressure) or ATM:P (Atmospheric
Pressure) and press
MENU. If your unit is configured for multiple tanks,
the Select Engine menu will appear with up to three options. (If you
are using a single-tank configuration, or if you chose Pitot Speed or
Atmospheric Pressure, you will be directed to the main display.)
4. Highlight the desired tank and press
MENU. You will be taken back
to the main display.
To customize Single Digital page:
1. After the Single Digital page has been added to the page screen
rotation, use the
UP and DOWN keys to display it on the screen.
2. Press
MENU, select CUSTOMIZE and press MENU.
3. Highlight
PTT:S (Pitot Speed), WTR:P (Engine Water Pressure),
ENG:O:P (Engine Oil Pressure), FUL:P (Fuel Pressure), BST:P (Boost
Pressure),
TRN:O:P (Transmission Oil Pressure) or ATM:P (Atmospheric
Pressure) and press
MENU. The Select Engine menu will appear with