Filter
Top Products
20
5. Highlight
PITOT SPEED, ENG BST PRESS, ENG OIL PRESS, ENG WTR PRESS, FUEL
PRESSURE, TRNS OIL PRESS or ATM PRESSURE and press ENTER. The Select
Engine menu will appear with up to three options. (If your unit is set to
a single-engine configuration, or if you chose Pitot Speed or ATM
Pressure, you will be taken back to the Position menu.)
6. Select the desired engine and press
ENTER. You will be directed to
the Position menu.
7. Repeat steps 4-6 to customize the other position or press
EXIT
repeatedly to return to the main display.
To customize Quad Digital page:
1. After the Quad Digital page has been added to the page screen
rotation, use the
ENTER and EXIT keys to display it on the main screen.
2. Press
MENU, use the UP and DOWN keys to select CUSTOMIZE and press
ENTER. The Position menu will appear with four options: Data Box 1,
Data Box 2, Data Box 3 and Data Box 4.
3. Highlight the desired data position and press
ENTER.
5. Highlight
PITOT SPEED, ENG BST PRESS, ENG OIL PRESS, ENG WTR PRESS, FUEL
PRESSURE, TRNS OIL PRESS or ATM PRESSURE and press ENTER. The Select
Engine menu will appear with up to three options. (If your unit is set to
a single-engine configuration, or if you chose Pitot Speed or ATM
Pressure, you will be taken back to the Position menu.)
6. Select the desired engine and press
ENTER. You will be directed to
the Position menu.
7. Repeat steps 4-6 to customize the other positions or press
EXIT
repeatedly to return to the main display.
To customize Fuel Manager page:
1. After the Fuel Manager page has been added to the page screen
rotation, use the
ENTER and EXIT keys to display it on the main screen.
2. Press
MENU, use the UP and DOWN keys to select CUSTOMIZE and press
ENTER. The Position menu will appear with three options: Top Data,
Center Data and Bottom Data.
3. Highlight the desired data position and press
ENTER.
5. Highlight
PITOT SPEED and press ENTER.
6. Select the desired engine and press
ENTER. You will be directed to
the Position menu.
7. Repeat steps 4-6 to customize the other positions or press
EXIT
repeatedly to return to the main display.