Filter
Top Products
17
4. Press
ENTER. You will be taken back to the Bus Devices list. Press
EXIT repeatedly to return to the main display.
To reconfigure the EP-90R:
1. Press MENU, select SYSTEM SETUP and press ENTER.
2. Highlight
BUS DEVICES and press ENTER. Select a configured pressure
sensor and press
ENTER.
3. Highlight
RECONFIGURE and press ENTER.
4. Select the
PITOT SPEED, ENG BST PRESS, ENG OIL PRESS, ENG WTR PRESS, FUEL
PRESSURE, TRNS OIL PRESS or ATM PRESSURE and press ENTER. The Select
Engine menu will appear with up to three options. (If you are using a
single-engine configuration you will be taken back to the Bus Devices
list.)
5. Select the desired tank and press
ENTER. You will be taken back to
the Bus Devices list. Press
EXIT repeatedly to return to the main
display.
Displaying Pressure Sensor Data
You can display pressure sensor data on the Single Analog, Dual
Analog, Quad Analog, Single Digital, Dual Digital, Quad Digital and
Fuel Manager pages.
Page Screen Rotation
The Page Screen Rotation consists of multiple pages that have been set
up for display. Once pages have been added to the page screen rotation,
they can be set to scroll across the screen automatically or manually.
Use the
ENTER and EXIT keys to manually scroll pages across the
screen. Pressing the
ENTER key moves the scroll in one direction.
Pushing the
EXIT key moves the scroll in the other direction. You will
use the Page Scrolling if you want pages to automatically scroll across
the screen. Refer to your LMF-400 manual for more information about
Page Scrolling.
To add a page to the display:
1. Press MENU, use the UP and DOWN keys to select PAGES and press
ENTER. A menu will pop up with four options: Add Page, Remove Page,
Page Scrolling and Pop-Ups Setup.
2. Select ADD PAGE and press ENTER.
3. Highlight Single Analog, Dual Analog, Quad Analog, Single Digital,
Dual Digital, Quad Digital or Fuel Manager and press
ENTER. The
following message will appear: Press Enter to add the selected page.
4. Press
ENTER, which will take you back to the main display, where
the page you selected will be shown on the screen.