Filter
Top Products
13
up to three options. (If your unit is configured for one engine, or if you
chose Pitot Speed or Atmospheric Pressure, you will be directed back to
the main display.)
4. Select the desired engine and press
MENU. You will be taken back to
the main display.
To customize Dual Digital page:
1. After the Dual Digital page has been added to the page screen
rotation, use the
UP and DOWN keys to display it on the screen.
2. Press
MENU, select CUSTOMIZE and press MENU. The Position menu will
appear with two options: Top Data and Bottom Data.
3. Select the desired data position and press
MENU.
4. Highlight
PTT:S (Pitot Speed), WTR:P (Engine Water Pressure),
ENG:O:P (Engine Oil Pressure), FUL:P (Fuel Pressure), BST:P (Boost
Pressure),
TRN:O:P (Transmission Oil Pressure) or ATM:P (Atmospheric
Pressure) and press
MENU. The Select Engine menu will appear with
up to three options. (If your unit is configured for one engine, or if you
chose Pitot Speed or Atmospheric Pressure, you will be directed back to
the main display.)
5. Select the desired engine and press
MENU. You will be taken back to
the main display.
To customize Fuel Manager page:
1. After the Fuel Manager page has been added to the page screen
rotation, use the
UP and DOWN keys to display it on the screen.
2. Press
MENU, select CUSTOMIZE and press MENU.
3. Highlight
PTT:S (Pitot Speed) and press MENU. You will be taken
back to the main display.
Pressure Range (Gauge Page only)
From the analog page, you can set pressure ranges for Boost, Oil, Fuel
and Transmission Oil Pressure.
To set pressure range:
1. From the Gauge page, press MENU and select SYSTEM SETUP.
2. Highlight
PRES RNGS (Pressure Ranges), which will open the Select
Pressure menu with the following options: FUL:P (Fuel Pressure),
BST:P (Boost Pressure), WTR:P (Engine Water Pressure), Eng:O:P
(Engine Oil Pressure) and Trn:O:P (Transmission Oil Pressure).