Filter
Top Products
9
LMF-200: EP-90R
Pressure Configuration
This section covers how to use EP-90R Pressure Sensor with the LMF-
200 Multi-function gauge.
NOTE:
You will notice the LMF-200 does not have an Exit key. Menus will
time out after a preset amount of time (3, 5, 10 or 15 seconds). The
default setting is 5 seconds. Refer to your LMF-200 instruction
manual for more information on the Timeout feature.
LMF-200 Multi-function Digital Gauge.
Boat Setup
If this is the first time you have turned on your LMF-200, you will have
to complete Boat Setup before you will be able to configure your
pressure sensor.
To execute Boat Setup:
1. With Boat Setup highlighted on the screen, press MENU. The Boat
Setup menu will appear, allowing you to select an engine-tank
configuration that matches the number of engines and fuel tanks on
your vessel. Boat Setup options include: 1 En/1 Tk, 1 En/2 Tk, 2 En/1
Tk, 2 En/2 Tk, 3 En/1 Tk and 3 En/3 Tk.
2. Select the configuration option that matches number of engines and
tanks on your vessel and press
MENU.
3. Select the tank you want to set up and press
MENU, which will open
the Tank Size window.