Filter
Top Products
15
LMF-400: EP-90R
Pressure Configuration
This section covers how to use your EP-90R Pressure Sensor with the
LMF-400 Multi-function gauge.
LMF-400 Multi-function Digital gauge.
Boat Setup
If this is the first time you have turned on your LMF-400, you will have
to complete Boat Setup before you will be able to configure your water
pressure sensor.
To execute Boat Setup:
1. With Boat Setup highlighted on the screen, press ENTER. A menu
will appear, allowing you to choose the number of engines and fuel
tanks on your vessel. The Boat Setup menu options are: 1 Eng/1 Tank,
1 Eng/2 Tank, 2 Eng/1 Tank, 2 Eng/2 Tanks, 3 Eng/1 Tank or 3 Eng/3
Tanks.
2. Use the
UP and DOWN keys to select the engine-tank configuration
that applies to your vessel and press
ENTER. After setting the
engine/tank configuration, the Tank Size menu will appear with up to
three options (Port Tank, Center Tank and Starboard Tank), depending
on the engine tank configuration you chose. (If you selected one tank
during Boat Setup, you will be taken directly to the Setting Tank Size
Window in Step 4.)
3. Select the desired tank and press
ENTER, which will open the Setting
Tank Size window.
4. Use the
UP and DOWN keys to input the number of gallons the tank
will hold and press
ENTER. Press EXIT and repeat steps 3 and 4 for each
of the remaining tanks.