Filter
Top Products
10
F.10 v.3 OPERATING MANUAL
© 2002 Design, 2014 Doc. No. 12-5380-r01 (7/15/14)
• A (< 2 sec) - to step forward through selections of OFF, ON, and SET (Fig. 7B).
• M (< 2 sec) - to step back through the selections.
• S (< 2 sec) - to save the selection.
>> If OFF or ON is selected, operation reverts to the Lead-in screen.
>> If SET is selected, the Set CDT screen is displayed.
• S (2 sec) - to revert to CDT Lead-in, if no setting change.
• M (2 sec), or 2 minutes of no button action, will revert to Watch Default Time.
Set CDT, information includes (Fig. 8):
> Graphics TIMR and SEt.
> Timer setting (hr:min) with TIME icon, with Hour digits flashing.
• A (hold) - to scroll upward through Hour Set Points (8/sec) from 0: to 23: in increments of 1: (hr).
• A (< 2 sec) - to step upward through Hour Set Points.
• M (< 2 sec) - to step back through Set Points.
• S (< 2 sec) - to save the Hour setting and flash the Minute digits.
• A (hold) - to scroll upward through Minute Set Points (8/sec) from :00 to :59 in increments of :01 (min).
• A (< 2 sec) - to step upward through Minute Set Points.
• M (< 2 sec) - to step back through Set Points one at a time.
• S (< 2 sec) - to save the CDT setting and revert to the CDT Status screen with SEt flashing, allowing ON or OFF to be selected
as previously described.
> ON will then start the countdown and revert to CDT Lead-in.
> OFF will save the setting and revert to CDT Lead-in.
The CDT will run in the background until it counts down to 0:00, or it is set OFF, or FREE Mode is accessed or a dive is started in
which case the countdown will terminate and revert to OFF.
When CDT reaches 0:00, the Audible will sound during which 0:00 with the CDT icon will flash on the Watch Default Time screen.
DAILY ALARM
When set On, the Daily Alarm will -
> be synchronized with Watch Default Time.
> sound the Audible every day at the Time set, while operating in Watch Mode.
> not sound the Audible while operating in FREE Mode.
> run in the background until set Off.
Daily Alarm Lead-in, information includes (Fig. 9):
> Graphics Go To and dAY AL with icon.
• S (< 2 sec) - to access Daily Alarm Status.
• A (< 2 sec) - to step forward to Set Time Lead-in.
• M (< 2 sec) - to step back to CDT Lead-in.
• M (2 sec), or 2 minutes of no button action, will revert to Watch Default Time.
Daily Alarm Status, information includes (Fig. 10):
> Graphic ALRM.
> Alarm Time (hr:min) with TIME icon, and AM (or PM) icon if 12 Hour Format.
> Graphic ON (or OFF) flashing, with Alarm icon.
• A (< 2 sec) - to step forward through the selections of OFF, ON, and SET.
• M (< 2 sec) - to step back through the selections.
• S (< 2 sec) - to save the selection, and -
> if OFF or ON is selected, revert to Daily Alarm Lead-in.
> if SET is selected, the Set screen is displayed.
• S (2 sec) - to revert to Daily Alarm Lead-in, if no setting change.
• M (2 sec), or 2 minutes of no button action, will revert to Watch Default Time.
Set Daily Alarm, information includes (Fig. 11):
> Graphics ALRM and SEt Alarm icon.
> Alarm Time (hr:min) with icons, Hour digits flashing.
• A (hold) - to scroll upward through Hour Set Points (8/sec) from 0: to 23: in increments of 1: (hr).
• A (< 2 sec) - to step upward through Hour Set Points.
• M (< 2 sec) - to step back through Set Points.
• S (< 2 sec) - to save the Hour setting and flash the Minute digits.
• A (hold) - to scroll upward through Minute Set Points (8/sec) from :00 to :59 in increments of :01 (min).
• A (< 2 sec) - to step upward through Minute Set Points.
• M (< 2 sec) - to step back through Set Points.
• S (< 2 sec) - to save the Alarm setting and revert to the Daily Alarm Status screen with SEt flashing, allowing ON or OFF to be
selected as previously described.
Fig. 7B - CDT STATUS
(to access Set)
Fig. 8 - SET CDT
(hr:min)
Fig. 9 - DAILY ALARM
LEAD-IN
Fig. 10 - DAILY ALARM
STATUS (set, ready)
Fig. 11 - SET DAILY
ALARM (hr:min)
or