Filter
Top Products
13
F.10 v.3 OPERATING MANUAL
© 2002 Design, 2014 Doc. No. 12-5380-r01 (7/15/14)
CHRONOGRAPH (Stop Watch, Lap/Run Timer)
The Chrono is operational during all modes (Watch, Free Surface, and Dive). Once started, the Chrono remains on the display and
continues to run until M is pressed (< 2 sec) to revert to the Lead-in (Go To) screen if in Watch or FREE Surface mode or to the Dive
Main if a dive was started while the Chrono was running. It runs unseen in the background when being displayed.
Chrono Lead-in, information includes (Fig. 20A):
> Graphics GoTo and Chro.
• S (< 2 sec) - to access Chrono Status.
• A (< 2 sec) - to step forward to Watch Main Time (or Surface Main if in FREE Mode).
• M (< 2 sec) - to step back to Set Time Lead-in (or ID-SN if in FREE Mode).
• M (2 sec), or 2 minutes of no button action, will revert to Watch Default Time.
• L (< 2 sec) - to toggle the Backlight On/Off.
Will be On for the duration time set.
• L (2 sec), while the Backlight is On, - to reset the timer to keep it On for the full duration time set.
Chrono Status, information includes (Fig. 20B, 20C):
> Graphic CHRO.
> Elapsed run time with TIME icon >> 0:00.00 flashing if not yet started or after reset; or counting up to 9:59:59.99 (min:sec_
.01 sec) if previously started.
After the first 4.99 seconds, the .01 digits display 2 dashes ( . - - ).
> Graphic LAP1 (up to 9) once started, blank if not.
• S* (< 2 sec) - to start the Timer which begins counting up in increments of .01 sec.
• S* (< 2 sec) - to save that Lap's time and display the next Lap # (up to 9, then restart with 1) with the Timer continuing to count
up, displaying total run time until stopped.
• A (< 2 sec) - to stop the Timer, save the Lap in progress (the final Lap) and total elapsed run time*, then recall LAP1 (up to 9)
flashing with it's time (Fig. 20D).
Repeat to recall other Lap times.
*Total elapsed run time is the entire time from S (< 2 sec) that first started Lap 1 until A (< 2 sec) that stopped the timer and
final lap.
• A (2 sec) after the timer is stopped - to reset total run time to 0:00.00.
• S* (2 sec) - to step back to the Chrono Lead-in.
• L (< 2 sec) - to toggle the Backlight On/Off.
Will be On for the duration time set.
• L (2 sec), while the Backlight is On, - to reset the timer to keep it On for the full duration time set.
*Chrono operations are blocked when S is operated during an alarm strike.
------------------------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------------------------
If no dive is conducted within 2 hours after accessing Free Mode, operation will revert to Watch Default Time.
Operation will also revert from Free Surface Mode to Watch DefaultTime 2 hours after completion of a dive
or if M is pressed (for 2 seconds) while viewing Free Surface Main.
Fig. 20B - CHRONO
STATUS (just started)
Fig. 20C - CHRONO
STATUS (running)
Fig. 20D - CHRONO LAP
RECALL
Fig. 20A - CHRONO
LEAD-IN