Filter
Top Products
6
F.10 v.3 OPERATING MANUAL
© 2002 Design, 2014 Doc. No. 12-5380-r01 (7/15/14)
INTERACTIVE CONTROL CONSOLE
The Interactive Control Console consists of four Control Buttons that allow you to select mode options and access specific informa-
tion. They are also used to enter Settings, operate the Backlight, and access additional screens of information.
Throughout this manual they will be referred to as the M, S, L, and A buttons.
• Upper/Left - Mode (M) button
• Upper/Right - Select (S) button
• Lower/Right - Light (L) button
• Lower/Left - Advance (A) button
OPERATING MODE STRUCTURE
Unless it is operating in Free Mode, the F10v3 will display Watch Time (Fig. 1) like a standard Watch until the mode is changed.
The A button is used to access other Watch functions that include an Alternate display, Countdown Timer, Chronograph (stop
watch/run timer), Daily Alarm, and Time settings. The A button also allows direct access to Log and History Modes.
The M button is used to access and return from the Free Surface Main screen.
The screens of the various modes will be displayed until a button is pressed to access another screen or mode, activate a sequence,
or for 2 minutes if no button is pressed. The Chronograph remains on display unless turned Off or another mode is accessed.
When operating in Free Mode, the F10v3 will enter Dive Mode upon descent to the DSD (Dive Start Depth) previously set which can
be 2, 4, or 6 FT (feet) or 0.6, 1.2, or 1.8 M (meters) for 1 second.
See page 20 for Set DSD.
OPERATION AS A DIVING GAUGE
Entering Settings relating to diving activities is only available in Free Surface Mode which also allows access to a Countdown Timer
(separate from the Watch CDT), Log, and History Modes.
PC/MAC INTERFACE
Interface with a PC or MAC, to allow uploading settings, downloading data, and updating firmware, is accomplished by connect-
ing the F10v3 to a PC or Mac USB port using the special Oceanic USB interface cable.
The PC software program together with the PC USB driver required is on the Oceanic Product CD, or it can be downloaded from
the Oceanic web site. The program's Help serves as the user manual which can be printed for personal use.
The DiverLog software program for MAC can be found at the Mac App Store.
The settings upload portion of the computer interface program can be used to set/change the Main Time, Date, Set Alarms group,
and Set Utilities group using the same interface system.
Information available for retrieval (download) from the F10v3 to the download portion of the program includes dive number, surface
interval time, start depth, end depth, maximum depth, elapsed dive time, start date, start time, lowest temperature under water,
sampling rate, dive profile, and set points.
The computer interface program also allows update of select versions of the F10v3's firmware (operating system software).
•
Refer to page 29 for more details relating to the computer interface system.
GRAPHIC MESSAGES
The segmented digits of the LCD are used to present various messages such as alarms, day of the week, modes, and items being
set, as well as graphics such as On, Off, Set, Last, Log, Hist, etc.
AUDIBLE ALARM
A LED Warning Light, located on the side of the housing, is synchronized with the Audible Alarm. It will flash as the Audible Alarm
sounds, then turn off when the Audible shuts off. The Audible and LED will not be active if the Alarm is set OFF, a group A setting
which completely disables it.
When Alarms strike, the Backlight will come On if Off and remain On until you turn it Off by pressing/releasing the L button or it
turns Off automatically after 10 seconds or the associated duration of beeps.
Situation that will sound (2) 2 second beeps -
• EDT (repeating Elapsed Dive Time) Alarm, if set On.
Situations that will sound 3 sets of (3) 1 second beeps -
• Watch Daily Alarm (surface only), if set On.
• Watch Countdown Timer reaches 0:00 (hr:min), if set On.
• Free Mode Countdown Timer reaches 0:00 (min:sec), if set On.
• SRT (Surface Recovery Time) Alert, if set On.
• RDI (Repeating Depth Interval) Alarm, if set On.
Situations that will sound 3 sets of (3) .125 second beeps -
• Depth Alarms DD1, DD2, and DD3, if set On.
M
A
S
L
Watch Functions
Default Time
Alternate info
Countdown Timer
Daily Alarm
Set Time
Chronograph
Fig. 1 - WATCH TIME