Filter
Top Products
3
F.10 v.3 OPERATING MANUAL
© 2002 Design, 2014 Doc. No. 12-5380-r01 (7/15/14)
INITIAL ACTIVATION
Oceanic Watch type dive gauges are placed in a Deep Sleep mode prior to being shipped from the factory. The intent is to extend
storage life of the Battery for up to 7 years, before the unit is initially placed in service.
In this mode, Date and Time are updated as they normally would be. However, they are not displayed. Upon waking the F10v3 up,
the correct Date and USA Pacific Time will be displayed and it will be ready to operate with full functions.
To wake the F10v3 up from Deep Sleep mode, simultaneously depress the upper/right (S) and lower/left (A) buttons for 2 seconds
until the display comes full ON displaying the MAIN TIME screen, then release them.
Once the F10v3 is brought out of the Deep Sleep mode, it can only be placed back in it by the factory.
FULL LCD
Components:
a. Mode (M) Button
b. Select (S) Button
c. Light (L) Button
d. Advance (A) Button
e. LED Warning Light
f. Icon - Low Battery
g. Icon - Time Am/Pm
h. Icon - Log Mode
i. Icon - Surface Interval Time
j. Icon - Degrees (Temp)
k. Icon - Elapsed Dive Time
l. Icon - Daily Alarm set
m. Icon - Depth/Max Depth
b
c
d
e
g
h
j
k
l
i
m
a
f