Filter
Top Products
This command sets or queries the status of the auto answer feature.
This command is a boolean command. See
Section 6.1 for more information on this type of command.
This command is saved to non-volatile memory only as part of a preset. The state of this command
will be restored after power-up only if a preset is saved and that preset is set to be the power-on
preset.
Example Description Status Message
S01AA1
Enable auto answer mode.
S01AA1
S01AA0
Disable auto answer mode.
S01AA0
S01AA2
Toggle auto answer mode.
S01AAx , where x is 0 or 1 depending on the current state of
auto answer mode.
S01AA?
Query auto answer mode.
S01AAx , where x is 0 or 1 depending on the current state of
auto answer mode.
8.2. ACKMOD -- Enable or Disable Acknowledgment Mode
This command controls whether or not status messages are sent. See Section 5 for more information
on status messages. This parameter is enabled by default, and it is rarely turned off by the host
controller.
This command is a boolean command. See Section 6.1 for more information on this type of command.
This command is saved to global non-volatile memory and is not part of a preset. Its value is saved
each time it is changed. It will retain its value after power-down. Since this command writes to non-
volatile memory, there will be a delay before an acknowledgment is returned.
Example Description Status Message
S01ACKMOD1
Enable acknowledgement mode.
S01ACKMOD1
S01ACKMOD0
Disable acknowledgement mode.
S01ACKMOD0
S01ACKMOD2
Toggle acknowledgement mode.
S01ACKMODx , where x is 0 or 1 depending on the
current state of acknowledgement mode.
S01ACKMOD?
Query acknowledgement mode.
S01ACKMODx , where x is 0 or 1 depending on the
current state of acknowledgement mode.
8.3. AEC -- Enable or Disable Acoustic Echo Cancellation
This command sets or queries the status of the Acoustic Echo Cancellation (AEC) algorithm on input
channel 1.
This command is a channel boolean command. See
Section 6.3 and Section 6.1 for more information
on this type of command.