Polycom RS-232 Waterskis User Manual


 
This command is an integer command. See Section 6.2 for more information on this type of
command. The minimum and maximum values for this command are -20 and 20, respectively.
This command is saved to non-volatile memory only as part of a preset. The state of this command
will be restored after power-up only if a preset is saved and that preset is set to be the power-on
preset.
Example Description Status Message
S01GAIND6
Set incoming DTMF gain to 6 dB.
S01GAIND6
S01GAIND>3
Increase incoming DTMF gain by 3 dB.
S01GAINDx , where x is the new value of the
incoming DTMF gain. If this command was
issued after the example above, then the
status message would be S01GAIND9 .
S01GAIND?
Query incoming DTMF gain.
S01GAINDx , where x is the new value of the
incoming DTMF gain. If this command was
issued after the example above, then the
status message would be S01GAIND9 .
8.55. GAINDIT -- Set Gain of Incoming DTMF Tones
This command sets the gain of the incoming DTMF tones. The gain of the outgoing DTMF depends on
the country that the Vortex is configured for (see the
COUNTRY) command.
This command is an integer command. See
Section 6.2 for more information on this type of
command. The minimum and maximum values for this command are -20 and 20, respectively.
This command is saved to non-volatile memory only as part of a preset. The state of this command
will be restored after power-up only if a preset is saved and that preset is set to be the power-on
preset.
Example Description Status Message
S01GAINDIT6
Set incoming DTMF tone gain to 6 dB.
S01GAINDIT6
S01GAINDIT>3
Increase incoming DTMF tone gain by
3 dB.
S01GAINDITx , where x is the new value
of the incoming DTMF tone gain. If this
command was issued after the example
above, then the status message would be
S01GAINDIT9 .
S01GAINDIT?
Query incoming DTMF tone gain.
S01GAINDITx , where x is the new value
of the incoming DTMF tone gain. If this
command was issued after the example
above, then the status message would be
S01GAINDIT9 .
8.56. GAINDT -- Set Dial Tone Gain