Filter
Top Products
S01MUTEI*2
Toggle mute status of all inputs.
S01MUTEI*abcd , where each of the letters
(a, b, etc.) is either 0 or 1 depending of the
current status of the mute on the
corresponding input. If this command was
sent after the example above, then the status
message would be S01MUTEI*0110 .
S01MUTEI*?
Query mute status of all inputs.
S01MUTEI*abcd where each of the letters
(a, b, etc.) is either 0 or 1 depending of the
current status of the mute on the
corresponding input. If this command was
sent after the example above, then the status
message would be S01MUTEI*0110 .
8.108. MUTEO -- Mute One or More Outputs
This command sets or queries the mute status of the analog outputs (1, A, B, T) .
This command is a channel boolean command. See
Section 6.3 and Section 6.1 for more information
on this type of command.
This command is saved to non-volatile memory only as part of a preset. The state of this command
will be restored after power-up only if a preset is saved and that preset is set to be the power-on
preset.
Example Description Status Message
S01MUTEO11
Mute output 1 .
S01MUTEO11
S01MUTEOA0
Unmute output A .
S01MUTEOA0
S01MUTEOT2
S01MUTEOTx , where x is either 0 or 1
depending on the current mute status of the
output.
S01MUTEOB?
Query mute status of output B .
S01MUTEOBx , where x is either 0 or 1
depending on the current mute status of the
output.
S01MUTEO*1
Mute all outputs (1, A, B, T) .
S01MUTEO*1111
S01MUTEO*0
Unmute all outputs (1, A, B, T) .
S01MUTEO*0000
S01MUTEO*1001
Mute outputs 1 and T and unmute
outputs A and B.
S01MUTEO*1001
S01MUTEO*2
Toggle mute status of all outputs.
S01MUTEO*abcd where each of the letters
(a, b, etc.) is either 0 or 1 depending of the
current status of the mute on the
corresponding output. If this command was
sent after the example above, then the status
message would be S01MUTEO*0110 .