Filter
Top Products
This command is a matrix boolean command. See Section 6.4 and Section 6.1 for more information on
this type of command.
This command is saved to non-volatile memory only as part of a preset. The state of this command
will be restored after power-up only if a preset is saved and that preset is set to be the power-on
preset.
Example Description Status Message
S01MGATE1,A,1
Select the gated version of
microphone input 1 to be sent to
output A.
S01MGATE1,A,1
S01MGATE1,A,0
Select the ungated version of
microphone input 1 to be sent to
output A.
S01MGATE1,A,0
S01MGATE1,A,2
Toggle the gated status of the
crosspoint that routes microphone
input 1 to output A.
S01MGATE1,A,x , where x is 0 or 1
depending on the current gated status of the
crosspoint.
S01MGATE1,A,?
Query the gated status of the
crosspoint that routes microphone
input 1 to output A.
S01MGATE1,A,x , where x is 0 or 1
depending on the current gated status of the
crosspoint.
8.102. MIC -- Enable Microphone Gain Stage on Input 1
This command sets or queries the enabled state of the microphone gain stages on the microphone
input. Enabling the gain stage adds an extra 33 dB of gain in the input signal path. See the description
of the
GAINI command for information on how the MIC and GAINI commands relate to nominal
input levels.
This command is a channel boolean command. See
Section 6.3 and Section 6.1 for more information
on this type of command.
This command is saved to non-volatile memory only as part of a preset. The state of this command
will be restored after power-up only if a preset is saved and that preset is set to be the power-on
preset.
Example Description Status Message
S01MIC11
Enable microphone gain stage for input
channel 1.
S01MIC11
S01MIC10
Disable microphone gain stage for input
channel 1.
S01MIC10
S01MIC12
Toggle microphone gain stage for input
channel 1.
S01MIC1x , where x is 0 or 1 depending
on the current enabled state of the
microphone gain stage on input channel
1.