Simrad AP25 Marine Instruments User Manual


 
Simrad AP25 Autopilot
28 20221495F
Square-turn
The square turn feature in AUTO mode can also be made a
rectangle or any pattern when the next turn is 90°.
The user decides whether the first turn should be to Port or
Starboard.
Ensure that the Square-turn pattern has been selected under the
User Set-up 2 menu. Refer to Turn Pattern select on page
55.
To enter Square turn mode:
Press of the TURN/DODGE button repeatedly until SQUARE
is flashing in the display.
Boat turning to starboard
The time between each 90° course change can be
adjusted before the turn is initiated (1-30 min.).
The AP25 will continue on the set course until you
press either the PORT or STBD button to select the
direction in which to make the first course change.
If you do not press PORT or STBD within 1
minute, the autopilot will return to AUTO mode
and stay on course.
When the square turn is selected you can change the
time between each course change (1-20 min.) hence
the length of the leg. While you are on the leg you
can also change the time and thus change the shape
of the pattern. You can also at any time change the
set course.
To exit square-turn mode, press any of the mode
buttons. When pressing the AUTO button, the new
set course is shown in the upper portion of the
display.
Time