Filter
Top Products
<CH
CH> INS [1]DEL ENTR EXIT
SETUP A.8 SEQUENCE:[1]23456
FIGURE 3.2 - SEQUENCE EDITING
The current sequence is shown at the top center of the display as a string of digits. Each
digit in the sequence represents a stream number. To edit a digit, press the <CH or CH>
buttons until the digit you wish to edit is shown in brackets []. As you scroll through the
steps in the sequence, the digit in brackets is displayed above one of the buttons on the
display. To change this digit to another stream number, simply press the button below
the digit to increment the stream number. Pressing INS will insert a digit in front of the
bracketed digit and pressing DEL will delete the bracketed digit. A stream can be
inserted in the sequence more than once. The sequence can consist of a maximum of 12
digits.
When you are finished editing the sequence, press ENTR to store the new sequence in
memory. The new sequence remains in memory even when the instrument is powered
down. Pressing EXIT will exit the sequence editing menu without saving any changes.
P/N 02395D1 Teledyne API Model 450 O
3
Monitor Instruction Manual - Page 40