Wayne-Dalton 8100 Windload Scuba Diving Equipment User Manual


 
16
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local
yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com
Tools Needed:
Stacking Sections
Power Drill
7/16” Socket Driver
Lock
section
NOTE: For door section identification see page 4.
NOTE: Make sure hinges are flipped down, when
stacking another section on top.
With assistance, lift second section and guide rollers
into the vertical tracks. Keeping the ends of the
sections aligned, install remaining section(s), except
top section, in same manner.
Starting with the center most hinge, flip up the hinge
leaf, and hold it tight against section. Secure it to the
section using (2) 1/4”- 14 x 7/8” self drilling screws.
Repeat for all remaining center hinges.
For windload option codes (A): 1100
Flip up the left hand end hinge(s) leaf, and hold tight
against the section while securing it to the section
using (2) 1/4”- 14 x 7/8” self drilling screws. Repeat
for the right hand end hinge(s).
For windload option codes (B): 1101, 1102, 1103,
1104, 1120, 1121, 1123, 1140, 1141, 1142 or 1143
Flip up the left hand end hinge(s) leaf, and hold tight
against the section while securing it to the section
using (4) 1/4”- 14 x 7/8” self drilling screws. Repeat
for the right hand end hinge(s).
For windload option codes (C): 1124, 1125, 1142
or 1144
Flip up the left hand end hinge(s) leaf, and hold tight
against the section while securing it to the section
using (6) 1/4”- 14 x 7/8” self drilling screws. Repeat
for the right hand end hinge(s).
Repeat for other sections except the top section.
NOTE: Install lock at this time (sold separately) see
side lock instructions in optional installations on
page 26.
CENTER HINGE
(2) 1/4” - 14 x 7/8”
Self drilling screws
Hinge
leaf
Section
(2) 1/4” - 14 x 7/8”
Self drilling screws
(A)
(B)
Hinge
leaf
Hinge
leaf
(4) 1/4” - 14 x 7/8”
Self drilling screws
Section
Section
(C)
(6) 1/4” - 14 x 7/8”
Self drilling screws
Hinge leafs
Section