Filter
Top Products
27
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local
yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com
Tools Needed:
❉
OPTIONAL INSTALLATION
Trolley Operator
Header
Tape Measure
OPERATOR MUST BE TESTED AT TIME OF
INSTALLATION AND MONTHLY THEREAFTER AS
DESCRIBED IN YOUR OPERATOR’S INSTALLATION
INSTRUCTIONS AND OWNER’S MANUAL, TO ENSURE
THAT DOOR SAFETY FEATURES FUNCTION. FAILURE
TO TEST OR MAKE ANY NECESSARY ADJUSTMENTS
OR REPAIRS, CAN RESULT IN SEVERE OR FATAL
INJURY
1. Attach operator rail to suitable mounting
surface, 2 x 6 lumber minimum.
2. Install operator rail 1” to 1-1/2” (25 - 38 mm)
above high arc of top section of the door.
3. Attach operator to ceiling using perforated
angle.
4. Mount operator to ceiling so that 1” to 1-1/2”
(25 - 38 mm) clearance is maintained between
trolley rail and top section when door is fully
open (trolley rail will slope down towards rear).
5. Attach door arm to operator bracket with cotter
and clevis pin.
IMPORTANT: ANGLES MUST BE SECURELY ATTACHED
TO SOUND FRAMING MEMBER(S).
WARNING
Operator
Framing members
Perforated angle
Perforated angle
Operator rail
Operator rail
Trolley arm attachment
Clevis pin
Cotter
pin
Operator
bracket
Door arm to
trolley arm