Filter
Top Products
2 Freedom HF Installation Guide
Safety Instructions
• Before you begin the installation, review the “Important Safety
Instructions” on page iv, and read this entire section so you can plan
your installation from beginning to end.
• Disconnect all AC and DC power sources to prevent accidental shock.
Disable and secure all AC and DC disconnect devices and automatic
generator starting devices.
Installation Codes
Governing installation codes vary depending on the specific location and
application of the installation. Some examples include the following:
• The U.S. National Electrical Code (NEC),
• The Canadian Electrical Code (CEC),
• The U.S. Code of Federal Regulations (CFRs),
• Canadian Standards Association (CSA) and the RV Industry
Association (RVIA) for installations in RVs, and
• The American Boating & Yachting Committee (ABYC) for Marine
installations in the U.S.
It is the installer’s responsibility to ensure that all applicable installation
requirements are met.
SHOCK HAZARD
Xantrex Technology recommends that all wiring be done by a certified
technician or electrician to ensure adherence to the applicable electrical
safety wiring regulations.
Failure to follow these instructions can result in death or serious
injury.
Freedom HF Install Guide.book Page 2 Thursday, November 24, 2011 11:06 AM