Filter
Top Products
32 Freedom HF Installation Guide
Drip Shield Installation (For Marine Installations)
To install the drip shields:
1. Gather the four screws needed to fasten a single drip shield to a wall.
2. Locate an appropriate setting for the drip shields above the Freedom
HF making sure you cover the entire width of the unit.
You can overlay the shields as shown in Figure 10 below.
3. Fasten the screws through the holes in the drip shield into the wall. See
Figure 9.
Figure 10
Typical Drip Shield Placement on a Freedom HF 1800
FREEDOM
HF| 1000
Freedom HF Install Guide.book Page 32 Thursday, November 24, 2011 11:06 AM