Filter
Top Products
975-0395-01-01 3
This guide for use by qualified installers only.
Installation Tools and Materials
You will need the following to install the Freedom HF:
❐ Wire stripper
❐ Mounting screws or bolts
❐ #2 Phillips screwdriver
❐ 3.5mm slot long neck screwdriver for WAGO
1
terminals that are
available in Freedom HF 1000, 1055, and 1800 models.
❐ Wrench for DC terminals (1/2 inch or 13mm or adjustable)
❐ AC cable (i.e. 2-conductor-plus-ground cable), sized appropriately for
load and application
❐ Wire nuts or crimp connectors for AC wire and appropriate tools
❐ Two 1/2 inch strain-relief clamps (supplied) for AC cables
❐ DC cable, sized appropriately for load and application
❐ Lugs for DC cables to fit 8 mm (5/16 in.) DC stud terminals) as well as
appropriate tools (e.g. crimping tool)
❐ AC and DC disconnects and over-current protective devices
1. WAGO® manufactures connection devices such as terminal blocks and related accessories.
Many Freedom HF models use WAGO terminal blocks as AC input and output connections.
Freedom HF Install Guide.book Page 3 Thursday, November 24, 2011 11:06 AM