Appendix C System Configuration – Pocket PC 2000 113
E-EQ-MX5PCRG-F-ARC MX5 Reference Guide
Cisco Link Status
Immediately runs status on : signal strength, signal quality and overall link quality.
Client Encryption Manager
Enter the password to set encryption codes. Default password is “Cisco”. The password is case
sensitive.
Client Statistics Utility
Immediately runs statistics, cumulative. An option is available to forward statistics from the client.
Load New Firmware
The current firmware version number is displayed. An option is available to load different
firmware if supplied by the user.
Site Survey Tool
Immediately runs signal strength and quality and link speed. An option is available to Setup
parameters for Active Mode reporting.
Wireless Login Module
LEAP must be enabled before this option can be edited or viewed.
Connections
Access: the Windows icon | Programs | Connections
When finished, Tap OK to close the folder. Tap the Windows icon | Help for context-sensitive
help.
ActiveSync
Once a relationship has been established, ActiveSync will synchronize using the USB port, serial
ports, or the infrared port on the MX5. Tap the Windows icon | Help for context-sensitive help.
Note: ActiveSync does not transmit through the IR port in cradles.
IR ActiveSync
Tapping this menu option begins a connection to the host. If no connection is made, the program
closes.
