![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/5/22/5227c912-00ee-4d01-a46b-d84a4ebd89e2/5227c912-00ee-4d01-a46b-d84a4ebd89e2-bg5d.png)
AppLock 81
E-EQ-MX5PCRG-F-ARC MX5 Reference Guide
Enter the number of seconds the selected Application must wait before starting to run upon
reboot.
If no application is specified when the Administrator Control panel is closed, the device reboots
into Administrator mode. If a password has been set, but the application has not been specified,
the user will be prompted for the password before entering administration mode. The password
prompt remains on the display until a valid password is entered.
End User Internet Explorer
AppLock supports applications that utilize Internet Explorer, such as .HTML pages and JAVA
applications. The end user can run an application by entering the application name and path in
Internet Explorer’s address bar.
To prevent the end user from executing an application using this method, the address bar and
Options settings dialog are restricted in Internet Explorer. This is accomplished by creating an
Internet Explorer that is used in end user mode, End-user Internet Explorer (EUIE). The EUIE
executes the Internet Explorer application in full screen mode which removes the address bar and
status bar. The Options Dialog is also removed so the end user cannot re-enable the address bar.
The administrator specifies the EUIE by simply checking the “Internet” checkbox in the Control
tab of the Administrator applet. The internet application should then be entered in the
“Application” text box. If the standard Internet Explorer that is shipped with the device is desired,
it should be treated like any other application. This means that IEXPLORER.EXE should be
specified in the Application text box and the internet application should be entered in the
command line. In this case, do not check the Internet checkbox.
Security Panel
Figure 4-2 Administrator Security Panel