Physical Controls 31
E-EQ-MX5PCRG-F-ARC MX5 Reference Guide
Physical Controls
Power Key
Note: Refer to the section titled "Power Modes" for information relating to the power states of
the MX5.
The power key is located next to the <Z> key on the keypad. When a battery is inserted in the
MX5 for the first time, the Power key must be pressed.
Quickly tapping the Power key places the MX5 immediately in Suspend mode. Quickly tapping
the Power key again, or connecting the AC adapter, immediately returns the MX5 from Suspend.
Note: The unit will not suspend on AC power nor when connected through ActiveSync.
Reboot Sequence
When the Pocket PC desktop is displayed or an application begins, the power up (or reboot)
sequence is complete. If you have previously saved your settings
3
, they will be restored on reboot.
Warm Reset
Hold down the Power key and the Orange key for 4+ seconds. A warm reset does not affect the
operating system and no data loss occurs.
Cold Reset
Hold down the Power key, the Blue key and the Orange keys for 4+ seconds.
The following steps will need to be performed when the MX5 powers on again:
1. Calibrate the touch screen.
2. Set the geographical Location.
3. Set the date and time.
Important:-- Because of the extreme nature of the Cold Reset, LXE recommends that the Cold
Reset be used only as an emergency procedure and the Warm Reset be used as necessary.
LXE recommends the RegSave file be run when configuration changes are made.
Note: When performing a Cold Reset on a device, the system will ask if you want to overwrite
files –LXE recommends selecting “No” and continuing with the Cold Reset process.
If you need to set up the integrated scanner barcode reading parameters, please refer to the
“Integrated Scanner Programming Guide” on the LXE Manuals CD or the LXE website
www.lxe.com.
3
Configuration settings are saved when a configuration applet is exited by tapping OK.
