System Configuration 59
E-EQ-MX5PCRG-F-ARC MX5 Reference Guide
Cisco Client
Access: the Windows icon | Programs | Cisco | ACU
Note: Online help is not available for this option.
Tap OK to return to the Programs options.
Aironet Client Utility
Note: The parameter values that follow are based on the driver version for the installed radio
card.You may not have all the parameters listed.
Factory Default Settings Other Options
SSID Blank
Client Name Blank
Infrastructure Mode Yes No
Power Save Mode Fast PSP CAM, Max PSP
Network Security
Type
None LEAP, Host based EAP
WEP No WEP Static WEP keys, Dynamic WEP keys
WEP Keys Blank
Authentication Types Open Shared Key
User Name Blank
User Password Blank
User Domain Blank
LEAP Disabled Enabled
Mixed Mode Disabled Enabled
World Mode Disabled Enabled
Data Rates Auto 1, 2, 5.5, 11 Mb Only
Transmit Power MAX 1mw, 30mw
Offline Channel Scan Enabled Disabled
Cisco Link Status
Immediately runs status on : signal strength, signal quality and overall link quality.
Client Encryption Manager
Enter the password to set encryption codes. Default password is “Cisco”. The password is case
sensitive.
Client Statistics Utility
Immediately runs statistics, cumulative. An option is available to forward statistics from the client.
Load New Firmware
The current firmware version number is displayed. An option is available to load different
firmware if supplied by the user.
