Appendix C System Configuration – Pocket PC 2000 119
E-EQ-MX5PCRG-F-ARC MX5 Reference Guide
System Tab
Access: the Windows icon | Settings | System tab
Tap the Windows icon | Help at any time for context-sensitive help.
About
Access: the Windows icon | Settings | System tab | About
Displays important device information. There are three tabs:
Version
Displays the Pocket PC version installed and the build number. Also
the type of processor, memory installed, whether the expansion slot is
in use and the current MX5 owner name.
Device ID
The default device name used to identify the MX5 to other computers is
“Pocket_PC”. The description is blank. You can make changes and tap
the OK button. The changes take effect immediately.
Copyrights
This information may be changed when a newer version of Pocket PC
is loaded.
Tap OK to close this menu option.
Align Screen
Access: the Windows icon | Settings | System tab | Align Screen
The screen can be aligned at any time. To start, tap the Align Screen button with the stylus.
Follow the instructions on the screen and press the Enter key (or tap the OK icon) to save the new
calibration settings. You can also press the <Esc> key sequence to cancel or quit.
Backlight
Access: the Windows icon | Settings | System tab | Backlight
Factory Default Settings
Timeout 2 seconds
Always Allowed Disabled
No key/pen activity Disabled
No key/pen activity and resume on activity Enabled
Keyboard backlight Enabled
Using the backlight while on battery power substantially reduces battery power.
You can check the battery status by selecting the Windows icon | Settings | System tab |
Handheld | Power tab. On this screen, the timeout for turning off the device if not used for 3
minutes (default value) while on battery power, can be adjusted. The factory default setting for
this parameter is Enabled.
