60 System Configuration
MX5 Reference Guide E-EQ-MX5PCRG-F-ARC
Site Survey Tool
Immediately runs signal strength and quality and link speed. An option is available to Setup
parameters for Active Mode reporting.
Wireless Login Module
LEAP must be enabled before this option can be edited or viewed.
Spectrum24
Access: Icon in Lower Right Hand Corner
Tap the icon in the lower right hand corner of the screen in the status bar and select one of the
menu options.
Status
Tap the Close button at any time to close the following informational displays.
Signal Displays the quality of the signal quality through the radio.
Info Displays version information and current status of the radio activity.
IP Status Displays information relating to the IP type, address, masks and the
host name.
Ping Begin a ping test.
APs Displays the AP Mac address and the Signal strength.
WLAN Profiles
Note: The parameter values that follow are based on the driver version for the installed radio
card.You may not have all the parameters listed.
Factory Default Settings Other Options
Wireless LAN Mode
Profile Name Symbol
802.11 ESSID Symbol
Operating Mode Infrastructur
e
Ad Hoc
Country USA
Encryption
Algorithm Open System 40 Bit, 128 Bit, Kerberos, EAP-TLS
IP Config DHCP Static
Power
Infrastructure Automatic Power Plus
Automatic Power
Saving Mode
Enabled Disabled
Manual Power Saving
Mode
80% 0 – 100 %
Tap the OK, Cancel or X butten when changes have been made.
