Appendix C System Configuration – Pocket PC 2000 123
E-EQ-MX5PCRG-F-ARC MX5 Reference Guide
Scanner
Note: Online help is not available for this option.
Access: the Windows icon | Settings | System tab | Scanner
The Keys may need to be set to Scan if there is an integrated scanner in the MX5.
Factory Default Settings
Main
Port 1 Disabled
Port 2 Disabled
Send key messages WEDGE Enabled
Keys
Left Enter
Right Enter
COM Ports (COM1 and COM4)
Baud Rate 9600
Parity None
Stop Bits 1
Data Bits 8
Note: If the internal scanner has to be configured to operate at any communication settings
other than 9600, N, 8, 1 and the computer either loses power or a cold boot command is
entered, the Scanner applet must be reconfigured to match the scanner communication
settings.
Note: ActiveSync will not work over the COM1 port if COM1 external is enabled in the
Scanner applet as a scanner input.
Tap OK to close this menu option. Tap X to cancel changes. Any changes made are in effect
immediately.
Wireless Network
Access: the Windows icon | Settings | System tab | Wireless Network
Use this option to activate a wireless profile from the pull-down menu. Add, edit or delete a user-
defined wireless profile.
Factory Default Settings
Profile “default”
Network type Access Point
Network name Blank
Enable Data Security Disabled
Card Power Management Off
Keys
Left Enter
Right Enter
Tap OK to close this menu option. Any changes made are in effect immediately.
