Hardware Configuration 29
E-EQ-MX5PCRG-F-ARC MX5 Reference Guide
Power Supply
The LXE MX5 uses two batteries for operation.
• A replaceable Lithium-Ion (Li-Ion) 2800mAh battery pack. The battery pack recharges
while in the MX5 with the computer in a powered cradle or with the optional external
power source attached. The main battery pack can be removed from the MX5 and
inserted in the MX5 Multi-Charger which simultaneously charges up to six battery packs
in four hours.
• An internal 450 mAh Nickel Metal Hydride (NiMH) backup battery. The backup battery
is recharged directly by the main battery when it is installed. Full charging of the backup
battery will take seven hours. The recharging of the backup battery is automatically
controlled by the MX5. The backup battery must be replaced by qualified service
personnel.
An AC adapter accessory is available.
COM Ports
The MX5 has two mini D serial ports that are configurable using the Settings | Handheld |
Comms tab:
Port 1 (left) COM 1 Port 2 (right) COM 4
USB RS-232
RS-232 AC Power
AC Power
COM 3 is always the IR port.
ActiveSync
Power to the COM ports may be turned on and off.
Note: ActiveSync is not configurable to work on COM 4. IR ActiveSync application is
available.
Audio Interface
An interface is available for headset/microphone operation. When the headset is plugged into the
port, the main speaker is disabled.
