20 Getting Started
MX5 Reference Guide E-EQ-MX5PCRG-F-ARC
Set the Power Off Timer
Note: Refer to the section titled "Power Modes" later in this manual for information relating to
the power states of the MX5.
Tap the Windows icon | Settings | System | Handheld Settings icon. Then select the Power tab.
On battery power:
Turn off device if not used for . . . (can be set from 1 minute to 5 minutes)
Change the parameter value and tap OK to save the change.
The default is 3 minutes. When the MX5 is connected to A/C power, the device does not go into
Suspend Mode.
Note: When the Power Off timer expires, the computer enters Suspend Mode (when not
connected by A/C power).
Connect Audio Jack (Optional)
The MX5 audio jack is located on the top of the unit next to the scan aperture. The internal
speaker is disabled when the audio jack is connected.
Figure 1-14 Connect Audio Jack
Insert the barrel end of the connector into the MX5 audio jack and push in firmly.
Note: The audio option draws power from the Main Battery Pack.
