A SERVICE OF

logo

Getting Started 15
E-EQ-MX5PCRG-F-ARC MX5 Reference Guide
Install Handstrap
Note: The handstrap cannot be used/installed when the MX5 has the trigger handle installed at
the same time.
An elastic hand strap is available for the MX5. Once installed, the hand strap provides a means for
the user to secure the computer to their hand. It is adjustable to fit practically any size hand and is
easily moved to allow installation or removal of the MX5 battery pack.
Figure 1-11 MX5 With Handstrap Installed
Installation
1. If a handle is installed, remove it at this time. See section “Install Pistol Grip Handle.”
2. Slip the strap through the upper bracket prior to securing the upper bracket to the unit.
Figure 1-12 Upper Strap Bracket
3. When slipping the strap through the bracket make sure the closed loop fastener surface is up.
4. After slipping the strap through the bracket, fold the strap over so that the two closed loop
fastener surfaces mate evenly.