Filter
Top Products
4.4 The status register
The status register stores information about which input is provided with a signal, which input is
switched to which output, and if autoswitch modus is enabled or disabled.
The following lists the bits of the Status Register, the
Most Significant Bit is the most left bit, the Least
Significant Bit is the most right bit.
Bit Auto Switch Out2 true Out1 true Reserved Out2 target Out1 target Prsnt2 Prsnt1
MSB … LSB
Bit No. Refers to value
1 Input 1 [0]: there is no sync signal at input 1
[1]: there is a sync signal at input 1
2 Input 2 [0]: there is no sync signal at input 2
[1]: there is a sync signal at input 2
3 Output 1
(target value)
[0]: Digital input 1 is routed to output 1 (default)
[1]: Digital input 2 is routed to output 1
4 Output 2
(target value)
[0]: Digital input 1 is routed to output 2
[1]: Digital input 2 is routed to output 2 (default)
5 For future use [0]: (hard coded specified as 0)
6 Output 1
(true value)
[0]: Digital input 1 is routed to output 1
[1]: Digital input 2 is routed to output 1
7 Output 2
(true value)
[0]: Digital input 1 is routed to output 2
[1]: Digital input 2 is routed to output 2
8 Auto switch [0]: auto switch disabled
[1]: auto switch enabled (default)